Low Pressure Centrifugal Blower For Ventilation System, Industrial Centrifugal Fan Manufacturer, Centrifugal Blower

Main Basic Data For Choosing Centrifugal Blower

1: What is the application of the blower?

2: What is the airflow rate? Q: m3/h;

3: What is the static pressure or full pressure? Pa?

4: What is the temperature of the raw gas?

5: The air/gas is dust/fume/water contented?

6: What is the altitude of the installation place?

7: What is the power supply?

Main Body Types of the Industrial Centrifugal Fan

A Type: Motor Direct

Advantage: Simple Structure, No wearing parts；

Disadvantage: Not suitable for high temperature working conditions, when the power became larger than 55KW, we do not suggest to use the A type centrifugal fan, because the bearing can not sustain the heavy impeller.

C Type: Belt Drive

Advantage:It is convenient to adjust the fan speed through the belt, we could choose the high efficiency working point,. The fan could used in high temperature working conditions.

Disadvantage: The belt itself has 3-7% efficiency loss. After working for a long time, the efficiency will decline. and it is equipped with bearing box, it is need adding lubricate oil and replace the belt.

D Type: Motor+Coupling

Advantage: Widely applied in high power and high temperature working conditions; less wearing parts;

Disadvantage: High cost and high price.

4 Types of the Impeller

Airfoil Impeller:

Advantage: High efficiency: Compared with traditional wind turbines, airfoil-type fans use wind energy more efficiently.

Backward Curved/Inclined Impeller: Generally, it is an induced draft fan. The impeller hub and the impeller are not parallel. The impeller outlet angle is less than 90 degrees, which is a backward-inclined impeller, also called a backward impeller.

Advantages: The impeller has high structural strength and can be used in higher static pressure systems. The power curve has no overload, low noise, large air volume, wide high efficiency zone, high efficiency and no overload.

Disadvantages: Due to the fast running speed, the requirements for dynamic balance are relatively high, so larger shafts and bearings are required.

Forward Curved Impeller: Generally for a blower, the impeller hub is parallel to the impeller edge. If the

impeller outlet angle is greater than 90 degrees, it is a forward-inclined impeller, also called a forward impeller.

Advantages: smaller shafts and bearings can be used, a wide operating range, and low cost.

Disadvantages: The shape of the performance curve may be parallel to the resistance curve, the blade structure is low in strength, and the rotation speed is low. When the system static pressure is reduced, it is likely to cause the motor to be overloaded

Industrial Centrifugal Fan's Directions

ROTATION VIEW FROM DRIVE SIDE R=Right Side

ROTATION VIEW FROM DRIVE SIDE L=Left Side

Technical Data for Basic Choosing

These technical data is based on air temperature: T=20℃

AM44-800A: A means A type connection we mentioned in upper parts.

AM44-280A Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1	1310	1000	960	66.5	0.55	1.1KW
	2	1480	990	940	70.5	0.58
	3	1650	970	910	74.0	0.60
	4	1810	920	850	76.0	0.61
	5	1980	850	760	74.5	0.63
	6	2150	760	660	72.5	0.63
	7	2320	670	550	68.5	0.63

AM44-315A Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1	1880	1280	1230	67.5	0.99	1.5KW
	2	2120	1270	1210	71.5	1.04
	3	2360	1240	1160	75.0	1.08
	4	2600	1170	1080	77.0	1.10
	5	2840	1080	970	74.5	1.14
	6	3080	980	850	73.5	1.14
	7	3320	860	700	69.5	1.13

1450	1	940	320	310	67.5	0.12	0.55KW
	2	1060	320	300	71.5	0.13
	3	1180	310	290	75.0	0.14
	4	1300	290	270	77.0	0.14
	5	1420	270	240	74.5	0.14
	6	1540	240	210	73.5	0.14
	7	1660	210	180	69.5	0.14

AM44-355A Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1	2700	1640	1580	68.5	1.80	3KW
	2	3050	1630	1550	72.5	1.90
	3	3390	1590	1490	76.0	1.97
	4	3740	1510	1390	78.0	2.01
	5	4080	1390	1250	77.5	2.03
	6	4420	1260	1090	74.5	2.07
	7	4770	1100	900	70.5	2.06

1450	1	1350	410	390	68.5	0.22	0.55KW
	2	1520	410	390	72.5	0.24
	3	1700	400	370	76.0	0.25
	4	1870	380	350	78.0	0.25
	5	2040	350	310	77.5	0.25
	6	2210	310	270	74.5	0.26
	7	2380	270	230	70.5	0.26

AM44-440A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1	3880	2110	2030	69.5	3.27	5.5KW
	2	4380	2090	1990	73.5	3.46
	3	4880	2040	1920	77.0	3.59
	4	5370	1940	1780	79.0	3.66
	5	5870	1780	1600	78.5	3.70
	6	6360	1610	1400	75.5	3.77
	7	6860	1410	1160	71.5	3.75

1450	1	1940	530	510	69.5	0.41	0.75KW
	2	2190	520	500	73.5	0.43
	3	2440	510	480	77.0	0.45
	4	2690	480	450	79.0	0.46
	5	2930	450	400	78.5	0.46
	6	3180	400	350	75.5	0.47
	7	3430	350	290	71.5	0.47

AM44-450A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1	5530	2670	2570	70.5	5.81	7.5KW
	2	6240	2650	2520	74.5	6.15
	3	6940	2590	2430	78.0	6.39
	4	7650	2450	2260	80.0	6.50
	5	8350	2260	2030	79.5	6.59
	6	9060	2040	1770	76.5	6.71
	7	9760	1780	1470	72.5	6.67

1450	1	2770	670	640	70.5	0.73	1.1KW
	2	3120	660	630	74.5	0.77
	3	3470	650	610	78.0	0.80
	4	3820	610	560	80.0	0.81
	5	4180	560	510	79.5	0.82
	6	4530	510	440	76.5	0.84
	7	4880	450	370	72.5	0.83

AM44-500A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1	7700	3400	3270	72.5	10.0	15KW
	2	8690	3370	3210	76.5	10.6
	3	9670	3290	3090	80.0	11.1
	4	10650	3120	2870	82.0	11.3
	5	11640	2870	2580	81.5	11.4
	6	12620	2600	2250	78.5	11.6
	7	13600	2270	1870	74.5	11.5

1450	1	3850	850	820	72.5	1.25	2.2KW
	2	4340	840	800	76.5	1.33
	3	4830	820	770	80.0	1.38
	4	5330	780	720	82.0	1.41
	5	5820	720	650	81.5	1.42
	6	6310	650	560	78.5	1.45
	7	6800	570	470	74.5	1.44

AM44-560A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1	10820	4260	4100	72.5	17.7	22KW
	2	12200	4230	4020	76.5	18.7
	3	13590	4130	3880	80.0	19.5
	4	14970	3910	3610	82.0	19.8
	5	16350	3610	3240	81.5	20.1
	6	17730	3260	2830	78.5	20.4
	7	19110	2850	2350	74.5	20.3

1450	1	5410	1060	1020	72.5	2.21	3KW
	2	6100	1060	1010	76.5	2.34	3KW
	3	6790	1030	970	80.0	2.44	4KW
	4	7480	980	900	82.0	2.48
	5	8170	900	810	81.5	2.51
	6	8860	810	710	78.5	2.55
	7	9550	710	590	74.5	2.54

960	1	3580	470	450	72.5	0.64	1.5KW
	2	4040	460	440	76.5	0.68
	3	4500	450	420	80.0	0.71
	4	4950	430	400	82.0	0.72
	5	5410	400	350	81.5	0.73
	6	5870	360	310	78.5	0.74
	7	6330	310	260	74.5	0.74

AM44-630A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	7710	1350	1300	72.5	3.98	5.5KW
	2	8690	1340	1270	76.5	4.22
	3	9670	1310	1230	80.0	4.39
	4	10650	1240	1140	82.0	4.47
	5	11640	1140	1020	81.5	4.52
	6	12620	1030	890	78.5	4.60
	7	13600	900	740	74.5	4.57

960	1	5100	590	570	72.5	1.15	2.2KW
	2	5750	590	560	76.5	1.22
	3	6400	570	540	80.0	1.27
	4	7050	540	500	82.0	1.30
	5	7700	500	450	81.5	1.31
	6	8360	450	390	78.5	1.34
	7	9010	400	330	74.5	1.33

AM44-710A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	11030	1710	1650	74.0	7.09	11KW
	2	12440	1700	1620	78.0	7.52
	3	13840	1660	1560	81.5	7.83
	4	15250	1570	1450	83.5	7.98
	5	16660	1450	1300	83.0	8.08
	6	18060	1310	1140	80.0	8.21
	7	19470	1140	940	76.0	8.15

960	1	7300	750	720	74.0	2.06	3KW
	2	8230	740	710	78.0	2.18
	3	9170	730	680	81.5	2.27
	4	10100	690	640	83.5	2.32
	5	11030	640	570	83.0	2.34
	6	11960	570	500	80.0	2.38
	7	12890	500	410	76.0	2.36

AM44-800A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	15940	2220	2130	76.0	12.9	15KW
	2	17970	2200	2090	80.0	13.7	15KW
	3	20000	2150	2020	83.5	14.3	18.5KW
	4	22040	2040	1880	85.5	14.6
	5	24070	1880	1690	85.0	14.8
	6	26100	1700	1470	82.0	15.0
	7	28140	1480	1220	78.0	14.9

960	1	10550	970	940	76.0	3.75	5.5KW
	2	11900	960	920	80.0	3.98
	3	13240	940	880	83.5	4.15
	4	14590	890	820	85.5	4.23
	5	15940	820	740	85.0	4.28
	6	17280	740	640	82.0	4.35
	7	18630	650	540	78.0	4.31

AM44-900A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	22690	2810	2700	76.0	23.3	30KW
	2	25590	2790	2650	80.0	24.7
	3	28480	2720	2560	83.5	25.8
	4	31380	2580	2380	85.5	26.3	37KW
	5	34270	2380	2130	85.0	26.6
	6	37170	2150	1860	82.0	27.0
	7	40060	1880	1550	78.0	26.8

960	1	15020	1230	1180	76.0	6.75	7.5KW
	2	16940	1220	1160	80.0	7.18	7.5KW
	3	18860	1190	1120	83.5	7.49	11KW
	4	20770	1130	1040	85.5	7.63
	5	22690	1040	940	85.0	7.72
	6	24610	940	820	82.0	7.82
	7	26520	820	680	78.0	7.77

AM44-1000A/D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	31440	3530	3400	76.0	40.6	45KW
	2	35450	3510	3340	80.0	43.2	45KW
	3	39460	3430	3220	83.5	45.0	55KW
	4	43470	3250	2990	85.5	45.9
	5	47480	2990	2690	85.0	46.4
	6	51490	2700	2340	82.0	47.1
	7	55500	2360	1950	78.0	46.7

960	1	20810	1550	1490	76.0	11.8	15KW
	2	23470	1540	1460	80.0	12.5	15KW
	3	26120	1500	1410	83.5	13.1	18.5KW
	4	28780	1420	1310	85.5	13.3
	5	31440	1310	1180	85.0	13.5
	6	34090	1180	1030	82.0	13.7
	7	36750	1040	850	78.0	13.6

AM44-1120D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	44170	4430	4270	76.5	71.1	90KW
	2	49800	4400	4190	80.5	75.6
	3	55440	4300	4040	84.0	78.8
	4	61070	4070	3750	86.0	80.3	110KW
	5	66710	3750	3370	85.5	81.3
	6	72340	3390	2940	82.5	82.6
	7	77980	2960	2440	78.5	81.8

960	1	29240	1940	1870	76.5	20.6	30KW
	2	32970	1930	1830	80.5	21.9
	3	36700	1880	1770	84.0	22.9
	4	40430	1790	1640	86.0	23.3
	5	44170	1640	1480	85.5	23.6
	6	47900	1490	1290	82.5	24.0
	7	51630	1300	1070	78.5	23.7

AM44-1200D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	54320	5090	4900	76.5	100.4	110KW
	2	61260	5050	4810	80.5	106.7	110KW
	3	68190	4940	4630	84.0	111.3	132KW
	4	75120	4660	4310	86.0	113.4
	5	82050	4310	3870	85.5	114.8
	6	88980	3890	3380	82.5	116.6
	7	95910	3400	2800	78.5	115.5

960	1	35970	2230	2150	76.5	29.1	37KW
	2	40560	2210	2110	80.5	31.0
	3	45140	2160	2030	84.0	32.3
	4	49730	2050	1890	86.0	32.9
	5	54320	1890	1700	85.5	33.3
	6	58910	1710	1480	82.5	33.8
	7	63500	1490	1230	78.5	33.5

AM44-1250D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	61400	5520	5310	76.5	123.1	132KW
	2	69240	5480	5210	80.5	130.9	132KW
	3	77070	5360	5030	84.0	136.5	160KW
	4	84900	5070	4670	66.0	139.1
	5	92740	4670	4200	85.5	140.8
	6	100570	4220	3660	82.5	143.0
	7	108410	3690	3040	78.5	141.7

960	1	40650	2420	2330	76.5	35.7	45KW
	2	45840	2400	2290	80.5	38.0	45KW
	3	51030	2350	2200	84.0	39.6	55KW
	4	56210	2220	2050	86.0	40.4
	5	61400	2050	1840	85.5	40.9
	6	66590	1850	1610	82.5	41.5
	7	71770	1620	1330	78.5	41.1

720	1	30490	1360	1310	76.5	15.1	22KW
	2	34380	1350	1290	80.5	16.0
	3	38270	1320	1240	84.0	16.7
	4	42160	1250	1150	86.0	17.0
	5	46050	1150	1030	85.5	17.2
	6	49940	1040	900	82.5	17.5
	7	53830	910	750	78.5	17.3

AM44-1350D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	78110	6440	6190	78.0	179.2	220KW
	2	88080	6390	6080	82.0	190.7	220KW
	3	98050	6250	5860	85.5	199.0	250KW
	4	108010	5920	5440	87.5	202.9
	5	117980	5450	4880	87.0	205.4
	6	127950	4930	4260	84.0	208.4
	7	137910	4310	3530	80.0	206.3

960	1	51720	2820	2710	78.0	52.0	75KW
	2	58320	2800	2660	82.0	55.3
	3	64910	2740	2570	85.5	57.8
	4	71510	2590	2390	87.5	58.9
	5	78110	2390	2140	87.0	59.6
	6	84710	2160	1870	84.0	60.5
	7	91310	1890	1550	80.0	59.9

720	1	38790	1590	1530	78.0	21.9	30KW
	2	43740	1580	1500	82.0	23.3
	3	48690	1540	1440	85.5	24.4
	4	53630	1460	1340	87.5	24.8
	5	58580	1340	1200	87.0	25.1
	6	63530	1210	1050	84.0	25.5
	7	68480	1060	870	80.0	25.3

AM44-1400D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	87120	6930	6660	78.0	214.9	250KW
	2	98230	6870	6530	82.0	228.7	250KW
	3	109350	6720	6300	85.5	238.7	280KW
	4	120460	6360	5850	87.5	243.4
	5	131580	5860	5250	87.0	246.3
	6	142690	5300	4580	84.0	250.0
	7	153810	4630	3800	80.0	247.4

960	1	57110	3040	2920	78.0	63.0	75KW
	2	64400	3010	2870	82.0	67.0	75KW
	3	71690	2950	2760	85.5	69.8	90KW
	4	78970	2790	2570	87.5	71.2
	5	86260	2570	2310	87.0	72.0
	6	93550	2320	2010	84.0	73.1
	7	100830	2030	1670	80.0	72.5

720	1	42830	1710	1640	78.0	26.6	37KW
	2	48300	1690	1610	82.0	28.2
	3	53770	1660	1550	85.5	29.5
	4	59230	1570	1450	87.5	30.0
	5	64700	1450	1300	87.0	30.4
	6	70160	1310	1130	84.0	30.9
	7	75630	1140	940	80.0	30.6

AM44-1500D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1450	1	107150	7950	7640	78.0	303.4	355-400KW
	2	120820	7890	7500	82.0	323.0
	3	134490	7710	7230	85.5	337.0
	4	148170	7310	6720	87.5	343.6
	5	161840	6730	6030	87.0	347.8
	6	175510	6080	5260	84.0	353.0
	7	189180	5320	4360	80.0	349.3

960	1	70940	3490	3350	78.0	88.1	110KW
	2	79990	3460	3290	82.0	93.7	110KW
	3	89040	3380	3170	85.5	97.8	132KW
	4	98100	3200	2950	87.5	99.7
	5	107150	2950	2640	87.0	100.9
	6	116200	2670	2300	84.0	102.4
	7	125250	2330	1910	80.0	101.4

720	1	53210	1960	1880	78.0	37.1	45KW
	2	60000	1950	1850	82.0	39.5	45KW
	3	66780	1900	1780	85.5	41.3	55KW
	4	73570	1800	1660	87.5	42.1
	5	80380	1660	1490	87.0	42.6
	6	87150	1500	1300	84.0	43.2
	7	93940	1310	1080	80.0	42.8

AM44-1600D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
960	1	86100	3970	3810	78.0	121.6	132KW
	2	97080	3940	3740	82.0	129.4	132KW
	3	108070	3850	3610	85.5	135.1	160KW
	4	119050	3640	3350	87.5	137.7
	5	130040	3360	3010	87.0	139.4
	6	141020	3030	2620	84.0	141.4
	7	152010	2650	2180	80.0	140.0

740	1	66370	2360	2270	78.0	55.7	75KW
	2	74830	2340	2220	82.0	59.3
	3	83300	2290	2140	85.5	61.9
	4	91770	2160	1990	87.5	63.1
	5	100240	1990	1790	87.0	63.8
	6	108700	1800	1560	84.0	64.8
	7	117170	1580	1290	80.0	64.1

AM44-1800D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
980	1	125140	5230	5030	78.0	233.1	280KW
	2	141110	5190	4930	82.0	248.1	280KW
	3	157070	5070	4760	85.5	258.9	315KW
	4	173040	4810	4420	87.5	264.0
	5	189010	4430	3970	87.0	267.2
	6	204970	4000	3460	84.0	271.1
	7	220940	3500	2870	80.0	268.4

740	1	94490	2980	2870	78.0	100.4	132KW
	2	106550	2960	2810	82.0	106.8
	3	118610	2890	2710	85.5	111.5
	4	130660	2740	2520	87.5	113.7
	5	142720	2520	2260	87.0	115.0
	6	154780	2280	1970	84.0	116.7
	7	166830	1990	1640	80.0	115.5

AM44-2000D Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
980	1	171660	6460	6210	78.0	394.7	450-560KW
	2	193560	6410	6090	82.0	420.2
	3	215470	6260	5870	85.5	438.5
	4	237370	5930	5460	87.5	447.0
	5	259270	5470	4900	87.0	452.5
	6	281170	4940	4270	84.0	459.2
	7	30307	4320	3540	80.0	454.5

740	1	129620	3680	3540	78.0	170.0	200KW
	2	146160	3650	3470	82.0	180.9	200KW
	3	162700	3570	3350	85.5	188.8	220KW
	4	179240	3380	3110	87.5	192.5
	5	195770	3120	2790	87.0	194.8
	6	212310	2820	2430	84.0	197.7
	7	228850	2460	2020	80.0	195.7

C type Centrifugal Fan

AM44-280C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
3500	1	1580	1460	1400	66.5	0.96	1.5KW	2750	1	1240	900	660	66.5	0.47	1.5KW
	2	1790	1440	1370	70.5	1.02			2	1400	890	850	70.5	0.49
	3	1990	1410	1330	74.0	1.05			3	1560	870	820	74.0	0.51
	4	2190	1340	1230	76.0	1.07			4	1720	830	760	76.0	0.52
	5	2390	1230	1110	74.5	1.10			5	1880	760	660	74.5	0.53
	6	2590	1110	970	72.5	1.11			6	2040	690	600	72.5	0.54
	7	2800	970	800	66.5	1.00			7	2200	600	490	68.5	0.54
3150	1	1430	1180	1130	66.5	0.70	1.5KW	2500	1	1130	740	710	66.5	0.35	1.1KW
	2	1610	1170	1110	70.5	0.74			2	1280	738	700	70.5	0.37
	3	1790	1140	1070	74.0	0.77			3	1420	720	680	74.0	0.38
	4	1970	1080	1000	76.0	0.78			4	1560	680	630	76.0	0.39
	5	2150	1000	900	74.5	0.80			5	1710	630	560	74.5	0.4
	6	2330	900	780	72.5	0.81			6	1850	570	490	72.5	0.4
	7	2520	790	650	66.5	0.80			7	2000	500	410	68.5	0.4

AM44-315C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
3300	1	2140	1660	1590	67.5	1.46	2.2KW	2600	1	1680	1030	990	67.5	0.71	1.5KW
	2	2410	1640	1560	71.5	1.54			2	1900	1020	970	71.5	0.75
	3	2680	1610	1510	75.0	1.60			3	2110	1000	940	75.0	0.78
	4	2950	1520	1400	77.0	1.82			4	2330	940	870	77.0	0.79
	5	3230	1400	1260	74.5	1.69			5	2540	870	780	74.5	0.82
	6	3500	1270	1100	73.5	1.88			6	2760	790	680	73.5	0.82
	7	3770	1110	910	69.5	1.67			7	2970	690	570	69.5	0.82
2900	1	1880	1280	1230	67.5	0.99	1.5KW	2250	1	1460	770	740	67.5	0.46	1.5KW
	2	2120	1270	1210	71.5	1.04			2	1640	760	730	71.5	0.49
	3	2360	1240	1160	75.0	1.08			3	1630	750	700	75.0	0.51
	4	2600	1170	1080	77.0	1.10			4	2010	710	650	77.0	0.51
	5	2840	1080	970	74.5	1.14			5	2200	650	590	74.5	0.53
	6	3080	980	850	73.5	1.14			6	2390	590	510	73.5	0.53
	7	3320	860	700	69.5	1.13			7	2570	510	420	69.5	0.53

AM44-355C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
3050	1	2840	1820	1750	66.5	2.09	3KW	2150	1	2000	900	870	68.5	0.73	1.5KW
	2	3200	1800	1710	72.5	2.21			2	2260	900	850	72.5	0.77
	3	3570	1760	1650	76.0	2.3			3	2510	880	820	76.0	0.80
	4	3930	1670	1540	78.0	2.33			4	2770	830	760	78.0	0.82
	5	4290	1540	1380	77.5	2.36			5	3030	760	690	77.5	0.83
	6	4650	1390	1200	74.5	2.41			6	3280	690	600	74.5	0.84
	7	5020	1210	1000	70.5	2.40			7	3540	600	500	70.5	0.84
2700	1	2520	1420	1370	68.5	1.45	2.2KW	1850	1	1720	670	640	68.5	0.47	1.5KW
	2	2840	1410	1340	72.5	1.53			2	1940	660	630	72.5	0.49
	3	3160	1380	1300	76.0	1.59			3	2160	650	610	76.0	0.51
	4	3480	1310	1200	78.0	1.62			4	2380	610	570	78.0	0.52
	5	3800	1200	1080	77.5	1.64			5	2600	570	510	77.5	0.53
	6	4120	1090	940	74.5	1.67			6	2820	510	440	74.5	0.54
	7	4440	950	780	70.5	1.67			7	3040	450	370	70.5	0.54

2380	1	2220	1110	1060	66.5	0.99	1.5KW	1600	1	1490	500	480	68.5	0.30	1.1KW
	2	2500	1100	1040	72.5	1.05			2	1680	500	470	72.5	0.32
	3	2780	1070	1010	76.0	1.09			3	1870	480	450	76.0	0.33
	4	3070	1020	940	78.0	1.11			4	2060	460	420	78.0	0.34
	5	3350	940	840	77.5	1.12			5	2250	420	380	77.5	0.34
	6	3630	850	730	74.5	1.15			6	2440	380	330	74.5	0.35
	7	3910	740	610	70.5	1.14			7	2630	330	280	70.5	0.35

AM44-400C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
3050	1	4090	2330	2240	69.5	3.80	5.5KW	1940	1	2600	940	910	69.5	0.98	1.5KW
	2	4610	2310	2200	73.5	4.03			2	2930	940	890	73.5	1.04
	3	5130	2260	2120	77.0	4.18			3	3260	910	860	77.0	1.08
	4	5650	2140	1970	79.0	4.25			4	3590	870	800	79.0	1.09
	5	6170	1970	1770	78.5	4.31			5	3920	800	720	78.5	1.11
	6	6690	1780	1550	75.5	4.39			6	4260	720	630	75.5	1.13
	7	7210	1560	1280	71.5	4.37			7	4590	630	520	71.5	1.12
2760	1	3700	1910	1840	69.5	2.82	4KW	1750	1	2340	770	740	69.5	0.72	1.5KW
	2	4170	1890	1800	73.5	2.98			2	2640	760	720	73.5	0.76
	3	4640	1850	1740	77.0	3.10			3	2940	740	700	77.0	0.79
	4	5110	1750	1610	79.0	3.15			4	3240	700	650	79.0	0.80
	5	5580	1620	1450	78.5	3.19			5	3540	650	580	78.5	0.61
	6	6060	1460	1270	75.5	3.25			6	3840	590	510	75.5	0.83
	7	6530	1280	1050	71.5	3.24			7	4140	510	420	71.5	0.82

2500	1	3350	1570	1510	69.5	2.10	3KW	1500	1	2010	560	540	69.5	0.45	1.1KW
	2	3780	1550	1480	73.5	2.22			2	2270	560	530	73.5	0.48
	3	4200	1520	1430	77.0	2.30			3	2520	550	510	77.0	0.50
	4	4630	1440	1320	79.0	2.34			4	2780	520	480	79.0	0.51
	5	5060	1330	1190	78.5	2.37			5	3030	480	430	78.5	0.51
	6	5490	1200	1040	75.5	2.42			6	3290	430	370	75.5	0.52
	7	5910	1050	660	71.5	2.40			7	3550	380	310	71.5	0.52
2200	1	2950	1210	1170	69.5	1.43	2.2KW	1320	1	1770	440	420	69.5	0.31	0.75KW
	2	3320	1200	1140	73.5	1.51			2	1990	430	410	73.5	0.33
	3	3700	1180	1100	77.0	1.57			3	2220	420	400	77.0	0.34
	4	4070	1110	1030	79.0	1.6			4	2440	400	370	79.0	0.34
	5	4450	1030	920	78.5	1.62			5	2670	370	330	78.5	0.35
	6	4830	930	600	75.5	1.65			6	2900	330	290	75.5	0.36
	7	5200	810	670	71.5	1.64			7	3120	290	240	71.5	0.35

AM44-450C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1	5530	2670	2570	70.5	5.81	7.5KW	1800	1	3430	1030	990	70.5	1.39	2.2KW
	2	6240	2650	2520	74.5	6.15			2	3870	1020	970	74.5	1.47
	3	6940	2590	2430	78.0	6.39			3	4310	1000	940	78.0	1.53
	4	7650	2450	2260	80.0	6.50			4	4750	940	870	80.0	1.56
	5	8350	2260	2030	79.5	6.59			5	5190	870	780	79.5	1.58
	6	9060	2040	1770	76.5	6.71			6	5620	790	660	76.5	1.60
	7	9760	1780	1470	72.5	6.67			7	6060	690	570	72.5	1.60
2520	1	4810	2010	1940	70.5	3.81	5.5KW	1600	1	3050	810	780	70.5	0.98	1.5KW
	2	5420	2000	1900	74.5	4.04			2	3440	810	770	74.5	1.03
	3	6030	1950	1830	78.0	4.20			3	3830	790	740	78.0	1.07
	4	6650	1850	1700	80.0	4.27			4	4220	750	690	80.0	1.09
	5	7260	1700	1530	79.5	4.32			5	4610	690	620	79.5	1.11
	6	7870	1540	1340	76.5	4.40			6	5000	620	540	76.5	1.13
	7	8490	1350	1110	72.5	4.38			7	5390	540	450	72.5	1.12

2250	1	4290	1600	1540	70.5	2.71	4KW	1400	1	2670	620	600	70.5	0.65	1.1KW
	2	4840	1590	1520	74.5	2.87			2	3010	620	590	74.5	0.69
	3	5390	1560	1460	78.0	2.99			3	3350	600	570	78.0	0.72
	4	5930	1470	1360	80.0	3.04			4	3690	570	530	80.0	0.73
	5	6480	1360	1220	79.5	3.08			5	4030	530	470	79.5	0.74
	6	7030	1230	1060	76.5	3.13			6	4370	480	410	76.5	0.75
	7	7580	1070	880	72.5	3.12			7	4710	420	340	72.5	0.75
2060	1	3930	1350	1290	70.5	2.08	3KW	1220	1	2330	470	450	70.5	0.43	1.1KW
	2	4430	1340	1270	74.5	2.21			2	2620	470	450	74.5	0.46
	3	4930	1300	1220	78.0	2.29			3	2920	460	430	78.0	0.48
	4	5430	1240	1140	80.0	2.33			4	3220	430	400	80.0	0.48
	5	5930	1140	1020	79.5	2.36			5	3510	400	360	79.5	0.49
	6	6440	1030	890	76.5	2.40			6	3810	360	310	76.5	0.5
	7	6940	900	740	72.5	2.39			7	4110	320	260	72.5	0.5

AM44-500 C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2700	1	7170	2940	2830	72.5	8.09	11KW	1700	1	4520	1170	1120	72.5	2.02	3KW
	2	8090	2920	2780	76.5	8.58			2	5090	1160	1100	76.5	2.14
	3	9000	2860	2680	80.0	8.92			3	5670	1130	1060	80.0	2.23
	4	9920	2700	2490	82.0	9.08			4	6240	1070	990	82.0	2.27
	5	10830	2490	2240	81.5	9.20			5	6820	990	890	81.5	2.30
	6	11750	2250	1950	78.5	9.36			6	7400	890	770	78.5	2.34
	7	12660	1970	1620	74.5	9.29			7	7970	780	640	74.5	2.32
2380	1	6320	2290	2200	72.5	5.54	7.5KW	1500	1	3980	910	870	72.5	1.39	2.2KW
	2	7130	2270	2160	76.5	5.88			2	4490	900	860	76.5	1.47
	3	7940	2220	2080	80.0	6.11			3	5000	880	830	80.0	1.53
	4	8740	2100	1940	82.0	6.22			4	5510	830	770	82.0	1.56
	5	9550	1940	1740	81.5	6.30			5	6020	770	690	81.5	1.56
	6	10360	1750	1520	78.5	6.41			6	6530	690	600	78.5	1.60
	7	11160	1530	1260	74.5	6.37			7	7040	610	500	74.5	1.59

2100	1	5580	1780	1710	72.5	3.81	5.5KW	1320	1	3510	700	680	72.5	0.95	1.5KW
	2	6290	1770	1680	76.5	4.04			2	3950	700	660	76.5	1.00
	3	7000	1730	1620	80.0	4.20			3	4400	680	640	80.0	1.04
	4	7710	1640	1510	82.0	4.27			4	4850	650	600	82.0	1.06
	5	8430	1510	1350	81.5	4.33			5	5300	600	530	81.5	1.07
	6	9140	1360	1180	78.5	4.40			6	5740	540	470	78.5	1.09
	7	9850	1190	980	74.5	4.37			7	6190	470	390	74.5	1.09
1900	1	5050	1460	1400	72.5	2.82	4KW	1200	1	3190	580	560	72.5	0.71	1.1KW
	2	5690	1450	1380	76.5	2.99			2	3590	580	550	76.5	0.75
	3	6340	1410	1330	80.0	3.11			3	4000	560	530	80.0	0.78
	4	6980	1340	1230	82.0	3.17			4	4410	530	490	82.0	0.80
	5	7620	1230	1110	81.5	3.21			5	4810	490	440	81.5	0.81
	6	8270	1110	970	78.5	3.26			6	5220	440	390	78.5	0.82
	7	8910	970	800	74.5	3.24			7	5630	390	320	74.5	0.82

AM44-560C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2500	1	9330	3170	3050	72.5	11.3	15KW	1560	1	5820	1230	1190	72.5	2.75	4KW
	2	10520	3140	2990	76.5	12.0			2	6560	1220	1160	76.5	2.92
	3	11710	3070	2880	80.0	12.5			3	7310	1200	1120	80.0	3.03
	4	12900	2910	2680	82.0	12.7			4	8050	1130	1040	82.0	3.09
	5	14090	2680	2410	81.5	12.9			5	8790	1040	940	81.5	3.13
	6	15280	2420	2100	78.5	13.1			6	9540	940	820	78.5	3.18
	7	16470	2120	1740	74.5	13.0			7	10280	820	680	74.5	3.16
2220	1	8290	2500	2400	72.5	7.92	11KW	1420	1	5300	1020	980	72.5	2.07	3KW
	2	9340	2480	2360	76.5	8.4			2	5980	1010	960	76.5	2.20
	3	10400	2420	2270	80.0	8.74			3	6650	990	930	80.0	2.29
	4	11460	2290	2110	82.0	8.9			4	7730	940	860	82.0	2.33
	5	12510	2110	1900	81.5	9.01			5	8000	860	780	81.5	2.36
	6	13570	1910	1660	78.5	9.17			6	6660	780	680	78.5	2.40
	7	14630	1670	1370	74.5	9.1			7	9360	680	560	74.5	2.38

1950	1	7280	1930	1850	72.5	5.37	7.5KW	1220	1	4550	750	730	72.5	1.32	2.2KW
	2	8210	1910	1820	76.5	5.69			2	5130	750	710	76.5	1.39
	3	9130	1870	1750	80.0	5.93			3	5720	730	690	80.0	1.45
	4	10060	1770	1630	82.0	6.03			4	6300	690	640	82.0	1.48
	5	10990	1630	1460	81.5	6.11			5	6880	640	570	81.5	1.50
	6	11920	1470	1280	78.5	6.21			6	7460	580	500	78.5	1.52
	7	12850	1290	1060	74.5	6.17			7	8040	500	420	74.5	1.51
1740	1	6490	1530	1480	72.5	3.82	5.5KW	1100	1	4110	610	590	72.5	0.96	1.5KW
	2	7320	1520	1450	76.5	4.05			2	4630	610	580	76.5	1.02
	3	6150	1490	1400	80.0	4.21			3	5150	590	560	80.0	1.06
	4	8980	1410	1300	82.0	4.29			4	5680	560	520	82.0	1.08
	5	9810	1300	1170	81.5	4.34			5	6200	520	470	81.5	1.10
	6	10640	1170	1020	78.5	4.41			6	6720	470	410	78.5	1.12
	7	11470	1030	840	74.5	4.38			7	7250	410	340	74.5	1.11

AM44-630C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2320	1	12330	3450	3320	72.5	16.3	22kW	1600	1	8500	1640	1580	72.5	5.35	7.5kW
	2	13900	3420	3260	76.5	17.3			2	9590	1630	1550	76.5	5.67
	3	15470	3350	3140	80.0	18.0			3	10670	1590	1490	80.0	5.90
	4	17050	3170	2920	82.0	18.3			4	11760	1510	1390	82.0	6.00
	5	18620	2920	2620	81.5	18.5			5	12840	1390	1250	81.5	6.08
	6	20190	2640	2290	78.5	18.9			6	13930	1250	1090	78.5	6.18
	7	21770	2310	1900	74.5	18.7			7	15010	1100	900	74.5	6.14
2180	1	11580	3050	2930	72.5	13.5	18.5kW	1450	1	7710	1350	1300	72.5	3.98	5.5kW
	2	13060	3020	2880	76.5	14.3			2	8690	1340	1270	76.5	4.22
	3	14540	2950	2770	80.0	14.9			3	9670	1310	1230	80.0	4.39
	4	16020	2800	2580	82.0	15.2			4	10650	1240	1140	82.0	4.47
	5	17500	2580	2320	81.5	15.4			5	11640	1140	1020	81.5	4.52
	6	16970	2330	2020	78.5	15.6			6	12620	1030	890	78.5	4.6
	7	20450	2040	1680	74.5	15.5			7	13600	900	740	74.5	4.57

2020	1	10730	2620	2520	72.5	10.8	15kW	1300	1	6910	1080	1040	72.5	2.87	4kW
	2	12100	2600	2470	76.5	11.4			2	7790	1080	1020	76.5	3.04
	3	13470	2540	2380	80.0	11.9			3	8670	1050	990	80.0	3.16
	4	14840	2400	2210	82.0	12.1			4	9550	1000	920	82.0	3.22
	5	16210	2210	1990	81.5	12.2			5	10430	920	820	81.5	3.26
	6	17580	2000	1730	78.5	12.4			6	11320	830	720	78.5	3.32
	7	18950	1750	1440	74.5	12.4			7	12200	720	600	74.5	3.29
1820	1	9670	2120	2040	72.5	7.87	11kW	1180	1	6270	890	860	72.5	2.14	3kW
	2	10910	2110	2000	76.5	8.34			2	7070	890	840	76.5	2.27
	3	12140	2110	1930	80.0	8.68			3	7870	870	810	80.0	2.37
	4	13370	1950	1800	82.0	8.84			4	8670	820	760	82.0	2.41
	5	14610	1800	1610	81.5	8.95			5	9470	760	680	81.5	2.44
	6	15840	1620	1410	78.5	9.10			6	10270	680	590	78.5	2.48
	7	17070	1420	1170	74.5	9.04			7	11070	600	490	74.5	2.46

AM44-710C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2280	1	17340	4230	4070	74.0	27.5	37kW	1690	1	12850	2330	2240	74.0	11.2	15kW
	2	19550	4200	4000	78.0	29.2			2	14490	2310	2200	78.0	11.9
	3	21770	4110	3850	81.5	30.5			3	16130	2260	2120	81.5	12.4
	4	23980	3890	3580	83.5	31.0			4	17770	2140	1970	83.5	12.6
	5	26190	3580	3220	83.0	31.4			5	19410	1970	1770	83.0	12.8
	6	28410	3240	2810	80.0	31.9			6	21050	1780	1540	80.0	13.0
	7	30620	2830	2330	76.0	31.7			7	22690	1560	1280	76.0	12.9
2120	1	16130	3660	3520	74.0	22.1	30kW	1500	1	11410	1830	1760	74.0	7.84	11kW
	2	18180	3630	3460	78.0	23.5			2	12870	1820	1730	78.0	8.33
	3	20240	3550	3330	81.5	24.5			3	14320	1780	1670	81.5	8.67
	4	22300	3360	3100	83.5	24.9			4	15780	1680	1550	83.5	8.83
	5	24350	3100	2780	83.0	25.2			5	17230	1550	1390	83.0	8.94
	6	26410	2800	2430	80.0	25.7			6	18690	1400	1220	80.0	9.09
	7	28470	2450	2020	76.0	25.5			7	20140	1230	1010	76.0	9.02

1900	1	14450	2940	2830	74.0	15.9	22kW	1340	1	10190	1460	1410	74.0	5.59	7.5kW
	2	16300	2920	2780	78.0	16.9			2	11490	1450	1380	78.0	5.94
	3	18140	2850	2680	81.5	17.6			3	12790	1420	1330	81.5	6.18
	4	19980	2700	2490	83.5	17.9			4	14090	1340	1240	83.5	6.3
	5	21830	2490	2230	83.0	18.2			5	15390	1240	1110	83.0	6.37
	6	23670	2250	1950	80.0	18.5			6	16690	1120	970	80.0	6.48
	7	25510	1970	1620	76.0	18.3			7	17990	980	810	76.0	6.43
1800	1	13690	2640	2540	74.0	13.6	18.5kW	1180	1	8980	1130	1090	74.0	3.82	5.5kW
	2	15440	2620	2490	78.0	14.4			2	10120	1120	1070	78.0	4.05
	3	17180	2560	2400	81.5	15.0			3	11270	1100	1030	81.5	4.22
	4	18930	2420	2230	83.5	15.3			4	12410	1040	960	83.5	4.30
	5	20680	2230	2010	83.0	15.5			5	13560	960	860	83.0	4.35
	6	22430	2020	1750	80.0	15.7			6	14700	870	750	80.0	4.43
	7	24170	1760	1450	76.0	15.6			7	15850	760	620	76.0	4.39

AM44-800C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2000	1	21980	4220	4060	76.0	33.9	45kw	1480	1	16270	2310	2220	76.0	13.7	18.5kw
	2	24790	4190	3980	80.0	36.0			2	18340	2290	2180	80.0	14.6
	3	27590	4090	3840	83.5	37.6			3	20420	2240	2100	83.5	15.2
	4	30400	3880	3570	85.5	38.3			4	22490	2120	1960	85.5	15.5
	5	33200	3570	3210	85.0	38.7			5	24570	1960	1760	85.0	15.7
	6	36000	3230	2800	82.0	39.4			6	26640	1770	1530	82.0	15.9
	7	38810	2820	2320	78.0	39.0			7	28720	1540	1270	78.0	15.8
1850	1	30330	3610	3470	76.0	26.8	37kw	1380	1	15170	2010	1930	76.0	11.1	15kw
	2	22930	3580	3410	80.0	28.5			2	17100	1990	1900	80.0	11.8
	3	25520	3500	3290	83.5	29.7			3	19040	1950	1830	83.5	12.3
	4	28120	3320	3060	85.5	30.3			4	20970	1850	1700	85.5	12.6
	5	30710	3060	2740	85.0	30.7			5	22910	1700	1530	85.0	12.7
	6	33300	2760	2390	82.0	31.1			6	24840	1540	1330	82.0	12.9
	7	35900	2410	1990	78.0	30.9			7	26780	1340	1110	78.0	12.8

1740	1	19120	3190	3070	76.0	22.3	30kw	1240	1	13630	1620	1560	76.0	8.08	11kw
	2	21560	3170	3020	80.0	23.7			2	15370	1610	1530	80.0	8.59
	3	24000	3100	2910	83.5	24.7			3	17110	1570	1480	83.5	8.95
	4	26440	2930	2700	85.5	25.2			4	18850	1490	1370	85.5	9.12
	5	28880	2700	2430	85.0	25.5			5	20580	1370	1230	85.0	9.23
	6	31320	2440	2120	82.0	25.9			6	22320	1240	1080	82.0	9.38
	7	33760	2140	1760	78.0	25.7			7	24060	1080	890	78.0	9.29
1570	1	17260	2600	2500	76.0	16.4	22kw	1080	1	11870	1230	1180	76.0	5.34	7.5kw
	2	19460	2580	2450	80.0	17.4			2	13380	1220	1160	80.0	5.67
	3	21660	2520	2370	83.5	18.2			3	14900	1190	1120	83.5	5.91
	4	23860	2390	2200	85.5	18.5			4	16410	1130	1040	85.5	6.03
	5	26060	2200	1980	85.0	18.7			5	17930	1040	940	85.0	6.1
	6	28260	1990	1720	82.0	19.0			6	19440	940	820	82.0	6.2
	7	30460	1740	1430	78.0	18.9			7	20960	820	680	78.0	6.14

AM44-900C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1750	1	27390	4090	3930	76.0	40.9	55kW	1280	1	20030	2190	2100	76.0	16.0	22kW
	2	30880	4060	3860	80.0	43.5			2	22090	2170	2070	80.0	17.0
	3	34370	3970	3720	83.5	45.3			3	25140	2120	1990	83.5	17.7
	4	37870	3760	3460	85.5	46.2			4	27700	2010	1850	85.5	18.1
	5	41360	3460	3110	85.0	46.8			5	30250	1850	1660	85.0	18.3
	6	44860	3130	2710	82.0	47.5			6	32810	1670	1450	82.0	18.6
	7	48350	2730	2250	78.0	47.1			7	35360	1460	1200	78.0	18.4
1640	1	25660	3590	3450	76.0	33.7	45kW	1200	1	18780	1920	1850	76.0	13.2	18.5kW
	2	28940	3560	3390	80.0	35.8			2	21170	1910	1820	80.0	14.0
	3	32210	3480	3270	83.5	37.3			3	23570	1860	1750	83.5	14.6
	4	35490	3300	3040	85.5	38.0			4	25970	1770	1630	85.5	14.9
	5	38780	3040	2730	85.0	38.5			5	28360	1630	1460	85.0	15.1
	6	42040	2750	2380	82.0	39.1			6	30760	1470	1280	82.0	15.3
	7	45310	2400	1980	78.0	38.7			7	33150	1290	1060	78.0	15.2

1540	1	24100	3170	3050	76.0	27.9	37kW	1120	1	17530	1670	1610	76.0	10.7	15kW
	2	27170	3140	2990	80.0	29.6			2	19760	1660	1580	80.0	11.4
	3	30250	3070	2880	83.5	30.9			3	22000	1620	1520	83.5	11.9
	4	33320	2910	2680	85.5	31.5			4	24240	1540	1420	85.5	12.1
	5	36400	2680	2410	85.0	31.9			5	26470	1420	1270	85.0	12.3
	6	39470	2420	2100	82.0	32.4			6	28710	1280	1110	82.0	12.5
	7	42500	2120	1740	78.0	32.1			7	30940	1120	920	78.0	12.3
1420	1	22220	2690	2590	76.0	21.9	30kW	1000	1	15650	1330	1280	76.0	7.63	11kW
	2	25060	2670	2540	80.0	23.2			2	17650	1320	1260	80.0	8.12
	3	27890	2610	2450	83.5	24.2			3	19640	1290	1220	83.5	8.46
	4	30730	2470	2280	85.5	24.7			4	21640	1230	1130	85.5	8.62
	5	33560	2280	2050	85.0	25.0			5	23640	1130	1010	85.0	8.73
	6	36400	2060	1790	82.0	25.4			6	25630	1020	890	82.0	8.86
	7	39230	1800	1480	78.0	25.1			7	27630	890	740	78.0	8.78

AM44-1000C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1580	1	34260	4200	4040	76.0	52.5	75kW	1180	1	25580	2340	2250	76.0	21.9	30kw
	2	38630	4160	3960	80.0	55.9			2	28850	2320	2210	80.0	23.3
	3	43000	4070	3820	83.5	58.2			3	32110	2270	2130	83.5	24.3
	4	47370	3860	3550	85.5	59.3			4	35380	2150	1980	85.5	24.7
	5	51740	3550	3190	85.0	60.1			5	38640	1980	1780	85.0	25.0
	6	56110	3210	2780	82.0	61.0			6	41900	1790	1550	82.0	25.4
	7	60480	2810	2310	78.0	60.4			7	45170	1570	1290	78.0	25.2
1450	1	31440	3530	3400	76.0	40.6	55kW	1070	1	23200	1920	1850	76.0	16.3	22kw
	2	35450	3510	3340	80.0	43.2			2	26160	1910	1820	80.0	17.3
	3	39460	3430	3220	83.5	45.0			3	29120	1870	1750	83.5	18.1
	4	43470	3250	2990	85.5	45.9			4	32080	1770	1630	85.5	18.4
	5	47480	2990	2690	85.0	46.4			5	35040	1630	1460	85.0	18.7
	6	51490	2700	2340	82.0	47.1			6	38000	1470	1280	82.0	18.9
	7	55500	2360	1950	78.0	46.7			7	40960	1290	1060	78.0	18.8

1360	1	29490	3110	2990	76.0	33.5	45kW	1000	1	21680	1680	1620	76.0	13.3	18.5kw
	2	33250	3090	2940	80.0	35.6			2	24450	1670	1590	80.0	14.2
	3	37010	3020	2830	83.5	37.1			3	27210	1630	1530	83.5	14.8
	4	40770	2860	2630	85.5	37.8			4	29980	1540	1420	85.5	15.0
	5	44530	2630	2360	85.0	38.3			5	32750	1420	1280	85.0	15.2
	6	48300	2380	2060	82.0	38.9			6	35510	1290	1110	82.0	15.5
	7	52060	2080	1710	78.0	38.5			7	38280	1120	930	78.0	15.3
1270	1	27530	2710	2610	76.0	27.3	37kW	940	1	20380	1490	1430	76.0	11.1	15kW
	2	31050	2690	2560	80.0	29.0			2	22980	1470	1400	80.0	11.8
	3	34560	2630	2470	83.5	30.2			3	25580	1440	1350	83.5	12.3
	4	38070	2490	2290	85.5	30.8			4	28180	1360	1260	85.5	12.5
	5	41590	2290	2060	85.0	31.2			5	30780	1260	1130	85.0	12.6
	6	45100	2070	1800	82.0	31.7			6	33380	1140	990	82.0	12.8
	7	48610	1810	1490	78.0	31.4			7	35980	990	820	78.0	12.7

AM44-1120C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1420	1	43250	4250	4090	76.5	66.8	90kW	1050	1	31980	2320	2240	76.5	27.0	37kW
	2	48770	4220	4010	80.5	71.0			2	36060	2310	2200	80.5	28.7
	3	54290	4120	3870	84.0	74.0			3	40140	2250	2120	84.0	29.9
	4	59810	3910	3600	86.0	75.5			4	44230	2140	1970	86.0	30.5
	5	65330	3600	3230	85.5	76.4			5	48310	1970	1770	85.5	30.9
	6	70850	3250	2820	82.5	77.6			6	53390	1780	1540	82.5	31.4
	7	76370	2840	2340	78.5	76.8			7	56470	1550	1280	78.5	31.1
1320	1	40210	3670	3530	76.5	53.6	75kW	980	1	29850	2020	1950	76.5	21.9	30kW
	2	45340	3650	3470	80.5	57.0			2	33660	2010	1910	80.5	23.3
	3	50470	3560	3340	84.0	59.5			3	37470	1960	1840	84.0	24.3
	4	55600	3380	3110	86.0	60.6			4	41280	1860	1710	86.0	24.6
	5	60730	3110	2790	85.5	61.4			5	45090	1710	1540	85.5	25.1
	6	65860	2810	2440	82.5	62.3			6	48890	1550	1340	82.5	25.5
	7	70990	2460	2020	78.5	61.7			7	52700	1350	1120	78.5	25.3

1200	1	36550	3040	2920	76.5	40.3	55kW	880	1	26810	1630	1570	76.5	15.9	22kW
	2	41220	3010	2870	80.5	42.9			2	30230	1620	1540	80.5	16.9
	3	45880	2950	2760	84.0	44.7			3	33640	1580	1490	84.0	17.6
	4	50540	2790	2570	86.0	45.5			4	37060	1500	1380	86.0	18.0
	5	55210	2570	2310	85.5	46.1			5	40480	1380	1240	85.5	18.2
	6	59870	2320	2010	82.5	46.8			6	43900	1250	1080	82.5	18.5
	7	64530	2030	1670	78.5	46.4			7	47320	1090	900	78.5	18.3
1120	1	34120	2640	2540	76.5	32.8	45kW	840	1	25590	1490	1430	76.5	13.8	18.5kW
	2	38470	2620	2500	80.5	34.8			2	28850	1480	1400	80.5	14.7
	3	42820	2570	2410	84.0	36.3			3	32120	1440	1350	84.0	15.3
	4	47170	2430	2240	86.0	37.0			4	35380	1370	1260	86.0	15.6
	5	51530	2240	2010	85.5	37.5			5	38640	1260	1130	85.5	15.8
	6	55880	2020	1750	82.5	38.1			6	41910	1140	990	82.5	16.1
	7	60230	1770	1460	78.5	37.7			7	45170	990	820	78.5	15.9

AM44-1250C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1280	1	54200	4300	4140	76.5	84.7	110kW	940	1	39810	2320	2230	76.5	33.5	45kW
	2	61120	4270	4060	80.5	90.1			2	44880	2300	2190	80.5	35.7
	3	68030	4170	3920	84.0	93.9			3	49960	2250	2110	84.0	37.2
	4	74950	3950	3640	86.0	95.7			4	55040	2130	1960	86.0	37.9
	5	81860	3640	3270	85.5	96.9			5	60120	1960	1760	85.5	38.4
	6	88780	3290	2850	82.5	98.4			6	65200	1770	1540	82.5	39
	7	95700	2880	2370	78.5	97.5			7	70280	1550	1280	78.5	38.6
1190	1	50390	3720	3580	76.5	66.1	90kW	880	1	37260	2030	1960	76.5	27.5	37kW
	2	56820	3690	3510	80.5	72.4			2	42020	2020	1920	80.5	29.3
	3	63250	3610	3390	84.0	75.5			3	46770	1970	1850	84.0	30.5
	4	69680	3420	3150	86.0	76.9			4	51530	1870	1720	86.0	31.1
	5	76110	3150	2830	85.5	77.8			5	56280	1720	1550	85.5	31.5
	6	62540	2840	2470	82.5	79.0			6	61040	1560	1350	82.5	32.0
	7	88970	2490	2050	78.5	78.3			7	65790	1360	1120	78.5	31.7

1100	1	46580	3180	3060	76.5	53.7	75kW	820	1	34720	1770	1700	76.5	22.3	30kW
	2	52520	3150	3000	80.5	57.2			2	39150	1750	1670	80.5	23.7
	3	58470	3080	2890	84.0	59.6			3	43080	1710	1610	84.0	24.7
	4	64410	2920	2690	86.0	60.7			4	48010	1620	1490	86.0	25.2
	5	70350	2690	2420	85.5	61.5			5	52440	1490	1340	85.5	25.5
	6	76300	2430	2110	82.5	62.4			6	56870	1350	1170	82.5	25.9
	7	82240	2130	1750	78.5	61.8			7	61310	1180	970	78.5	25.6
1000	1	42350	2630	2530	76.5	40.4	55kW	740	1	31340	1440	1380	76.5	16.4	22kW
	2	47750	2610	2480	80.5	42.9			2	35330	1430	1360	80.5	17.4
	3	53150	2550	2390	84.0	44.8			3	39330	1400	1310	84.0	18.1
	4	58550	2410	2220	86.0	45.6			4	43330	1320	1220	86.0	18.5
	5	63960	2220	2000	85.5	46.2			5	47330	1220	1090	85.5	18.7
	6	69360	2010	1740	82.5	46.9			6	51330	1100	950	82.5	19.0
	7	74760	1760	1450	78.5	46.5			7	55320	960	790	78.5	18.8

AM44-1400C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
1120	1	66630	4130	3980	78.0	100.0	132kW	830	1	49380	2270	2160	78.0	40.7	55kW
	2	75130	4100	3900	82.0	106.3			2	55680	2250	2140	82.0	43.3
	3	83630	4010	3760	85.5	110.9			3	61980	2200	2070	85.5	45.1
	4	92140	3800	3500	87.5	113.0			4	68280	2090	1920	87.5	46.0
	5	100640	3500	3140	87.0	114.4			5	74580	1920	1730	87.0	46.5
	6	109140	3160	2740	84.0	116.1			6	80800	1740	1510	84.0	47.3
	7	117640	2760	2280	80.0	115.1			7	87180	1520	1250	80.0	46.8
1050	1	62470	3630	3490	78.0	82.4	110kW	770	1	45810	1950	1880	78.0	32.5	45kW
	2	70440	3600	3430	82.0	87.6			2	51650	1940	1840	82.0	34.6
	3	78410	3520	3310	85.5	91.4			3	57500	1890	1780	85.5	36.0
	4	86380	3340	3070	87.5	93.1			4	63340	1790	1650	87.5	36.7
	5	94350	3070	2760	87.0	94.2			5	69190	1650	1480	87.0	37.2
	6	102320	2780	2410	84.0	95.7			6	75030	1490	1300	84.0	37.7
	7	110290	2430	2000	80.0	94.8			7	80880	1310	1080	80.0	37.4

980	1	58300	3160	3040	78.0	67.0	90kW	720	1	42830	1710	1640	78.0	26.6	37kW
	2	65740	3140	2990	82.0	71.2			2	48300	1690	1610	82.0	28.2
	3	73180	3070	2880	85.5	74.3			3	53770	1660	1550	85.5	29.5
	4	80620	2910	2680	87.5	75.7			4	59230	1570	1450	87.5	30.0
	5	88060	2680	2410	87.0	76.6			5	64700	1450	1300	87.0	30.4
	6	95500	2420	2100	84.0	77.8			6	70160	1310	1130	84.0	30.9
	7	102930	2120	1740	80.0	77.1			7	75630	1140	940	80.0	30.6
910	1	54140	2730	2620	78.0	53.6	75kW	680	1	40460	1520	1470	78.0	22.4	30kW
	2	61050	2710	2580	82.0	57.0			2	45620	1510	1440	82.0	23.8
	3	67950	2650	2480	85.5	59.5			3	50780	1480	1390	85.5	24.8
	4	74860	2510	2310	87.5	60.6			4	55940	1400	1290	87.5	25.3
	5	81770	2310	2070	87.0	61.3			5	61100	1290	1160	87.0	25.6
	6	88680	2090	1810	84.0	62.3			6	66260	1170	1010	84.0	26.0
	7	95580	1820	1500	80.0	61.7			7	71420	1020	840	80.0	25.7

AM44-1600C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
960	1	86100	3970	3810	78.0	121.6	160kW	720	1	64570	2230	2140	78.0	51.3	75kW
	2	97080	3940	3740	82.0	129.4			2	72810	2210	2100	82.0	54.6
	3	108070	3850	3610	85.5	135.1			3	81050	2160	2030	85.5	57.0
	4	119050	3640	3350	87.5	137.7			4	89290	2050	1880	87.5	58.1
	5	130040	3360	3010	87.0	139.4			5	97530	1890	1690	87.0	58.8
	6	141020	3030	2620	84.0	141.4			6	105770	1710	1480	84.0	59.7
	7	152010	2650	2180	80.0	140.0			7	114000	1490	1220	80.0	59.1
900	1	80720	3490	3350	78.0	100.2	132kW	660	1	59190	1870	1800	78.0	39.5	55kW
	2	91010	3460	3290	82.0	106.6			2	66740	1860	1770	82.0	42.1
	3	101310	3380	3170	85.5	111.3			3	74300	1820	1700	85.5	43.9
	4	111610	3200	2950	87.5	113.0			4	81850	1720	1580	87.5	44.7
	5	121910	2950	2640	87.0	114.8			5	89400	1590	1420	87.0	45.3
	6	132210	2670	2300	84.0	116.5			6	96950	1430	1240	84.0	46.0
	7	142510	2330	1910	80.0	115.3			7	104500	1250	1030	80.0	45.5

840	1	75340	3040	2920	78.0	81.5	110kW	620	1	55600	1650	1590	78.0	32.8	45kW
	2	84950	3010	2860	82.0	86.7			2	62700	1640	1560	82.0	34.9
	3	94560	2950	2760	85.5	90.5			3	69790	1600	1500	85.5	36.4
	4	104170	2790	2570	87.5	92.2			4	76890	1520	1400	87.5	37.1
	5	113780	2570	2300	87.0	93.4			5	83980	1400	1250	87.0	37.5
	6	123390	2320	2010	84.0	94.8			6	91060	1270	1090	84.0	38.1
	7	133010	2030	1670	80.0	93.8			7	98170	1110	910	80.0	37.7
780	1	69950	2620	2520	78.0	65.2	90kW	580	1	52020	1450	1390	78.0	26.8	37kW
	2	78880	2600	2470	82.0	69.4			2	58650	1440	1370	82.0	28.5
	3	87800	2540	2380	85.5	72.4			3	65290	1400	1320	85.5	29.8
	4	96730	2410	2210	87.5	73.9			4	71930	1330	1220	87.5	30.4
	5	105650	2220	1990	87.0	74.8			5	78560	1230	1100	87.0	30.7
	6	114580	2000	1730	84.0	75.9			6	85200	1110	960	84.0	31.2
	7	123510	1750	1440	80.0	75.1			7	91840	970	790	80.0	30.9

AM44-1800C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
830	1	105990	3750	3610	78.0	141.6	185kW	640	1	81730	2230	2140	78.0	64.9	90kW
	2	119510	3720	3540	82.0	150.7			2	92150	2210	2100	82.0	69.1
	3	133030	3640	3410	85.5	157.3			3	102580	2160	2030	85.5	72.1
	4	146560	3450	3170	87.5	160.4			4	113010	2050	1880	87.5	73.5
	5	160080	3180	2850	87.0	162.3			5	123430	1890	1690	87.0	74.4
	6	173600	2870	2480	84.0	164.7			6	133860	1710	1480	84.0	75.5
	7	187120	2510	2060	80.0	163.0			7	144290	1490	1220	80.0	74.7
790	1	100880	3400	3270	78.0	122.1	160kW	600	1	76620	1960	1880	78.0	53.5	75kW
	2	113750	3370	3210	82.0	130.0			2	86390	1950	1850	82.0	56.9
	3	126620	3300	3090	85.5	135.6			3	96170	1900	1780	85.5	59.4
	4	139490	3120	2870	87.5	138.3			4	105940	1800	1660	87.5	60.6
	5	152360	2880	2580	87.0	140.0			5	115720	1660	1490	87.0	61.3
	6	165230	2600	2250	84.0	142.0			6	125490	1500	1300	84.0	62.2
	7	178100	2270	1860	80.0	140.6			7	135270	1310	1080	80.0	61.6

730	1	93220	2900	2790	78.0	96.3	132kW	540	1	68960	1590	1530	78.0	39.0	55kW
	2	105110	2880	2740	82.0	102.6			2	77750	1500	1500	82.0	41.5
	3	117000	2820	2640	85.5	107.0			3	86550	1540	1440	85.5	43.3
	4	128900	2670	2450	87.5	109.1			4	95350	1460	1340	87.5	44.2
	5	140790	2460	2200	87.0	110.4			5	104150	1340	1200	87.0	44.7
	6	152680	2220	1920	84.0	112.1			6	112940	1210	1050	84.0	45.4
	7	164580	1940	1590	80.0	110.9			7	121740	1060	870	80.0	44.9
690	1	88110	2590	2490	78.0	81.4	110kW	510	1	65120	1420	1360	78.0	32.8	45kW
	2	99350	2570	2450	82.0	86.6			2	73430	1410	1340	82.0	34.9
	3	110590	2520	2360	85.5	90.4			3	81740	1370	1290	85.5	36.4
	4	121840	2380	2190	87.5	92.1			4	90050	1300	1200	87.5	37.2
	5	133080	2190	1970	87.0	93.3			5	98360	1200	1070	87.0	37.6
	6	144320	1980	1710	84.0	94.6			6	106670	1080	940	84.0	38.2
	7	155560	1730	1420	80.0	93.7			7	114980	950	780	80.0	37.8

AM44-2000C Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
720	1	126120	3490	3350	78.0	156.5	200kW	580	1	101600	2260	2170	78.0	61.6	110kW
	2	142210	3460	3290	82.0	166.6			2	114560	2240	2130	82.0	87.1
	3	158300	3380	3170	85.5	173.9			3	127520	2190	2060	85.5	90.9
	4	174390	3200	2950	87.5	177.3			4	140480	2080	1910	87.5	92.7
	5	190480	2950	2640	87.0	179.4			5	153450	1910	1720	87.0	93.8
	6	206570	2670	2300	84.0	182.1			6	166410	1730	1500	84.0	95.2
	7	222670	2330	1910	80.0	180.2			7	179370	1510	1240	80.0	94.2
690	1	120660	3200	3080	78.0	137.8	105kW	540	1	94590	1960	1880	78.0	66.0	90kW
	2	136280	3180	3020	82.0	146.7			2	106660	1950	1850	82.0	70.3
	3	151710	3110	2910	85.5	153.0			3	118730	1900	1780	85.5	73.4
	4	167130	2940	2700	87.5	156.0			4	130790	1800	1660	87.5	74.8
	5	182550	2710	2430	87.0	157.9			5	142860	1660	1490	87.0	75.7
	6	197970	2450	2120	84.0	160.3			6	154930	1500	1300	84.0	76.8
	7	213390	2140	1760	80.0	158.6			7	167000	1310	1080	80.0	76.0

660	1	115610	2930	2820	78.0	120.6	160kW	500	1	87580	1680	1620	78.0	52.4	75kW
	2	130360	2910	2760	82.0	128.4			2	98760	1670	1590	82.0	55.8
	3	145110	2840	2660	85.5	133.9			3	109930	1630	1530	85.5	58.2
	4	159860	2690	2470	87.5	136.6			4	121110	1540	1420	87.5	59.4
	5	174610	2480	2220	87.0	138.2			5	132280	1420	1270	87.0	60.1
	6	189360	2240	1940	84.0	140.3			6	143450	1290	1110	84.0	61.0
	7	204110	1960	1610	80.0	138.8			7	154630	1120	920	80.0	60.4
620	1	108600	2580	2480	78.0	100.0	132kW	450	1	78820	1360	1310	78.0	38.2	55kW
	2	122460	2560	2440	82.0	106.4			2	88880	1350	1280	82.0	40.6
	3	136320	2510	2350	85.5	111.0			3	98940	1320	1240	85.5	42.4
	4	150170	2370	2180	87.5	113.2			4	109000	1250	1150	87.5	43.2
	5	164030	2190	1960	87.0	114.6			5	119050	1150	1030	87.0	43.8
	6	177880	1980	1710	84.0	116.3			6	129110	1040	900	84.0	44.4
	7	191740	1730	1420	80.0	115.1			7	139170	910	750	80.0	44.0

AM44-280A Centrifugal Fan Technical Data
RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)	RMP r/min	No	Airflow m3/h	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
	1								1
	2								2
	3								3
	4								4
	5								5
	6								6
	7								7
	1								1
	2								2
	3								3
	4								4
	5								5
	6								6
	7								7

AM44-280A Centrifugal Fan Technical Data
RMP(r/min)	No	Airflow (m3/h)	Full Pressure(Pa)	Static Pressure(Pa)	Inner Efficiency(%)	Inner Power(kw)	Motor with Power(Kw)
2900	1						KW
	2
	3
	4
	5
	6
	7

1450	1	KW
	2
	3
	4
	5
	6
	7

Categories	Centrifugal Fan
Brand	ACMAN
Model	AM44 Centrifugal fan
Type	AM44 Low Pressure
Airflow Range	940-187120 m3/h
Pressure Range	300-4200 pa
Impeller Type	Backward Curved Impeller
Update Time	Dec 22,2024